Turnkey dental implantation service in Kaluga

The vast majority of people sooner or later face the need to restore lost teeth. Any dentist will confirm: implant prosthetics is the best way to restore lost teeth.

Currently, implantation is the most effective method of restoring lost teeth.

An implant is an artificial titanium “root” that is surgically installed into the jaw bone where the patient’s tooth used to be. After this, the process of “osseointegration” occurs—the “fusion” of the titanium implant and bone tissue.

Implantation is divided into: one-stage (prosthetics begins immediately after installation of the implant) and two-stage (with delayed prosthetics).

Indications and contraindications for implantation

A dental implant is a multi-component structure that is implanted into bone tissue and replaces the root of a tooth. Simply put, the screw base of the crown. If one or more teeth are lost, the indications are implantation and only for serious diseases such as osteoporosis, cancer, etc. there are contraindications.

Titanium, beloved by all dentists, osseointegrates in most cases and is absolutely safe in terms of its chemical composition.

Zirconium dioxide implants have a number of aesthetic advantages over titanium structures. However, the material has a low degree of osseointegration, which precludes its use in clinical cases. The method of dental restoration is determined and prescribed only by a doctor.

How much does it cost to install a tooth?

Introduction to the topic

Dental prosthetics is an important procedure that occurs when one or more teeth are lost. The complexity of this process lies in the correct selection of the prosthetic element, its correct installation, and finally, providing adequate care. The prosthetic procedure cannot be classified as a cheap dental service. In this article we will analyze all possible variations of tooth installation and their price range.

What does the price depend on?

The final cost of prosthetics is formed from the following parts:

• choosing a dental clinic (or rather, it all depends on the equipment used there and the qualifications of the dentists working there);
• initial examination and consultation;
• preparatory procedures;
• the cost of the dental structure (the minimum is about 4,000 rubles, and the maximum is 35,000 rubles);
• consumables (directly materials for making impressions or temporary crowns);
• implant material:
• metal ceramics - from 25 thousand rubles,
• ceramic composite - from 30 thousand rubles,
• zirconium dioxide - from 35 thousand rubles;
• the work of a prosthetics doctor, the work of a dental technician who directly manufactures implanted elements;
• product manufacturer or brand.

Preparatory procedures include an initial consultation. To conduct a full examination, you will be assigned an X-ray of the jaw. It can be produced in the following ways:

• radiography (150 rubles and above),
• panoramic photo (about 800 rubles),
• computed tomography (more than 1,500 rubles).

Also, if during the examination it turns out that you have unhealthy teeth or previously dentures need to be replaced, then so-called preliminary treatment is prescribed. This may include: replacing old fillings, installing a pin and pulp removal. These procedures, if prescribed to you, can be performed by the dentist at your clinic free of charge. However, it is worth understanding that the qualifications of the specialist, the quality of materials, and the equipment used in private and public clinics vary greatly.

When all the preparatory procedures have been completed, the main stage begins, which includes turning the crowns, making an impression, fitting and installing the implant. And the final stage will be correct rehabilitation and adequate care of the oral cavity and dental elements.

The doctor who examined you can give you a preliminary price for the entire procedure. Be prepared that it may change along the way. Each clinic may indicate the price differently. One organization will indicate the entire cost of prosthetics at once, while another will separately describe each procedure.

Fixed prosthetics

Modern dentistry offers several different options for fixed prosthetics. These include dental crowns, dental bridges and complete dentures.

Classic implantation. This procedure involves installing each individual implant with a crown in place of each individual lost tooth. If the volume and density of bone tissue do not allow the installation of an implant, then a bone augmentation procedure, or bone grafting, is performed. The healing process of the gums after this procedure takes approximately six months. This means that the entire process of prosthetics is lengthened. However, this option is considered the most durable and aesthetically pleasing.

Photo 1. Classic implantation

Dental bridge. In the case of installing a dental bridge, the crowns will be fixed on adjacent teeth or in the case of full jaw prosthetics, 6-8 pieces of implants. This significantly reduces the cost and time of prosthetics.

Photo 2. Dental bridge

How much does it cost to insert a front tooth?

Prosthetics of the front teeth is the most scrupulous procedure, since the implant must fully match the color and reflective abilities of the adjacent teeth. Both the patient and the doctor are interested in obtaining a highly aesthetic result. In this situation, a dental crown is installed on the implant. It can be made of metal ceramics or ceramics.

The main difference is that a metal-ceramic crown is of great quality and reliability, but since we are installing the front tooth, and the aesthetic component is important here, metal-ceramic crowns often cause a visual defect: part of the implant buried in the gum may be visible. The cost of such implantation is a little more than 15 thousand rubles. and, of course, it varies depending on the type of metal.

The second option is a ceramic crown. It literally looks like a real tooth, but it also costs more: prices start at 25 thousand rubles per tooth.

Important: the process of installing a crown is preceded by the implantation of an implant, the osseointegration of which on the upper jaw takes on average 4 months, and on the lower jaw – 6. After implantation, a repeat x-ray is prescribed to ensure that the process of implantation into the bone was completed correctly. And only after this will it be possible to install a dental crown.

You can find out the cost of front tooth prosthetics on our website in the “Our prices” section.

How much does it cost to insert one chewing tooth?

For molars, their functional component is more important than their aesthetic properties. The most important thing is that these teeth perform their functions and are resistant to abrasion. There are three possible options here:

• metal-ceramic prosthetics costing from 8 to 10 thousand rubles;
• installation of a stump tab - prices start from 5 thousand rubles;
• installation of structures made of zirconium dioxide is the most expensive option (from 16 thousand rubles).

How much does it cost to get a crown on a tooth?

In most cases, when people are faced with the need to restore a tooth, dentists advise choosing a dental crown, which can be made from the following materials:

• ceramics;
• metal ceramics;
• metal.

The table below shows their comparative characteristics and price range.

Table 1. Comparative characteristics of dental crowns

Cost of bridges

A bridge structure is used when it is necessary to replace several missing teeth. So-called dental bridges are attached to adjacent teeth or dentures.

Important: a negative factor in using bridges is that they may not be in close contact with the gum; Food particles can get into these gaps, so they usually require more careful care.

Modern dentistry offers 4 types of such prosthetics:

• Plastic bridge. The shortest and simplest design. Dentists usually use it as a temporary denture for people who are prone to allergic reactions to other materials from which dentures are made. Typically, plastic crowns are installed on one tooth. 1 crown costs around 1 thousand rubles.

  Photo 3. Plastic bridge

• Adhesive bridge prosthesis. The simplest and cheapest method, because the orthopedic dentist seems to build teeth directly in the patient’s mouth. He applies a special material and secures it with thread or glue. However, this method is not recommended for use when restoring chewing teeth, since neither fiberglass floss nor dental glue are durable materials, and such teeth will be prone to destruction. The entire procedure can cost 8-10 thousand rubles.

  Photo 4. Adhesive bridge prosthesis

• Metal-ceramic bridge. This design is usually made of an alloy of cobalt and chromium, its cost is approximately 18 thousand rubles.

  Photo 5. Metal-ceramic bridge

• Ceramic dental bridge. The material for the manufacture of this dental structure is zirconium dioxide. As in the case of an adhesive bridge, a ceramic bridge structure is not installed on chewing teeth, since they cannot withstand the load and are also subject to loss of strength. However, it is worth noting that they look quite natural. A similar design costs around 50 thousand rubles.

Photo 6. Ceramic dental bridge

Prices for partial dentures

The loss of one or more teeth can be addressed with removable dentures. Features and cost range of removable dentures are indicated in the following table.

How much do inlays and veneers cost?

Typically, this method of prosthetics is used for partial loss or destruction of a tooth. If the tooth is approximately 25% destroyed, dentists recommend inserting a denture. However, this method may not always be justified, and this is where dental inlays or veneers come to the rescue. The difference between them is that veneers are installed on teeth falling within the smile zone, and inlays are installed on chewing teeth.

The method of restoring a tooth using inlays is called microprosthetics. The teeth restored in this way adhere well to the tissue and form an integral system. The inlays have a high level of wear resistance and wear out slowly, which is important for molars. They evenly distribute the load on the tooth and are highly resistant to deformation or shrinkage. Their cost ranges from 20 to 25 thousand rubles.

Veneers are installed on the front teeth if:

• slight curvature of teeth;
• some dental defects (such as chips, yellow enamel or wide interdental spaces);
• a filling that is visually noticeable.

Veneers have a number of advantages. Firstly, it is reliability, and secondly, the shelf life is at least 10 years. They are mechanically strong and affordable. The only difficulty is choosing the right veneer color. However, modern dental clinics have a wide selection of colors, so the doctor will be able to choose the element that suits you. The cost of such beauty ranges from 35 to 50 thousand rubles.

Important: the presence of inlays or veneers does not change your daily oral care in any way.

Features of inexpensive prosthetics in Kaluga

Budget options for prosthetics include removable or temporary structures, as well as prosthetic crowns made of metal-ceramics. It is also worth inquiring about discount programs or promotions that may be held for clients of dental clinics. Each patient must understand and rationally compare the cost and quality of prosthetic structures. If you are installing an inexpensive option, be prepared for the fact that you may need to replace it in the near future.

You can find out the cost of prosthetics at the Albadentva clinic on our website in the “Our prices” section.

What causes the high price of dental implants?

The cost of such an operation in decent clinics will surprise even wealthy people. The rather high prices for dental implantation in Kaluga are explained by the high cost of materials, as well as the labor-intensive work of constructing an osteotomy (bone bed) - this is only the main part of the factors. The financial moment is offset by a number of advantages:

• The implant often acts as a support for the prosthesis.
• No intervention is required on adjacent teeth.
• Impeccable cosmetic effect.
• Preventing the development of periodontal disease and other negative consequences of missing teeth.
• It is possible to improve a number of physiological functions of bone tissue. A well-installed implant can perform a fundamental function

What implant systems do we use?

The choice of an implantation system depends on a combination of various factors: clinical situation, medical indications and contraindications, type of bone tissue and timing of prosthetics, wishes, aesthetic requirements and financial capabilities of the patient.

We use implants from trusted manufacturers in our practice: Nobel (USA, Sweden), Osstem (South Korea), Dentium (South Korea). For more than 20 years, the company has maintained its position in the medical market.

This is due to the high quality of manufacturing of implants, the technologies used in production, the investment of huge funds and efforts in research, development, innovation, and cooperation with Universities and Scientific Centers.

Of course, each company has its own production secrets, many years of experience and its own formula for success.

To be or not to be?

Installing implants in a timely manner means preventing complete tooth loss. Negligent treatment of a tooth leads to the development of pathogenic microflora and subsequent loss of it. This also leads to an imbalance of chewing loads caused by missing teeth.

Dental clinic “New Century” keeps up with the times. It is possible to install high-quality dental implants without leaving Kaluga, which was impossible 5 years ago. The operation uses high-precision modern equipment, which allows you to establish the preferred method of implantation and fixation of implants. The clinic is involved in the ANTIAIDS program, which provides complete confidence in the three-level sterilization system of the work area and the competence of doctors.

You can make an appointment at the “New Century” dentistry for the installation of dental implants by calling 77-46-46 or using the form on the website.

Dental implantation in dental clinics in Kaluga

• Denta honey
• Vilonova street, house 41
• +7 (4842) 22-… show all
• Mon-Fri 9:00–20:00; Sat 9:00–15:00

4.3 ratings: 6

4.0 ratings: 6

4.2 ratings: 5

4.2 ratings: 5

4.2 ratings: 5

3.8 ratings: 8

4.2 ratings: 13

3.6 ratings: 9

3.8 ratings: 5

4.1 ratings: 7

3.6 ratings: 5

3.9 ratings: 11

Further

Promotions in Kaliningrad for the installation of 1 implant

Promotion for installation of implants in Kaliningrad

The price for installing a turnkey implant is 18,900 rubles

Read more about dental implants for different people :

“Dental implantation” (Prices, Cost, Duration)

Make an appointment with a surgeon for a free consultation

tel. 777-270

Features of implant installation

Installation of implants and dental prosthetics

Classification by installation method

• Endodontic (intraosseous) - the classic scheme in the upper layers of the bone. They require its extension if the thickness at the installation site is insufficient, as well as cutting the gums during the operation.
• Basal implantation is carried out through a puncture in the gum and screwing into the deep layers of the jaw bone. It allows simultaneous loading and the possibility of installing a prosthesis on the day of implantation.
• Intramucosal implantation procedure, but the gingival tissue must be more than 2.2 mm thick.
• One-stage - the implant and temporary crown are installed. Usually at the same time as tooth extraction

Types of Dental Implants

Types of implants and structures

Intraosseous (endosseous) implants

Implanted directly into the jawbone. Based on their shape, they are distinguished into root-shaped, lamellar and combined models. Advantages: ease of installation.

Mini dental implants

Resemble small screws (diameter: 1.8-2.4 mm; length: 6-10 mm). There are one-piece (monolithic design) and two-piece (titanium pin + abutment). The advantage is that they are inexpensive.

Basal implants

They are installed in the deep (basal) layer of the bone of the upper/lower jaw through a puncture of the gums. The advantage is that installation is possible even with thin bone.

Zygomatic implants

Extended titanium pins Zygoma and Zygomatic (Noris Medical) are fixed deep into the zygomatic bone, which is not susceptible to inflammatory processes and atrophy and can immediately take on the load when chewing food.

Types and types of modern dental implants

What does it mean to insert a tooth?

How much does it cost to insert a tooth?

• Implant installation "Turnkey" - 18,900 RUR

• Prosthetics on an implant

Metal-ceramic crown (turnkey) with abutment - RUB 22,600.

• The minimum cost for a complete tooth insertion is 41,500 rubles.

To make an appointment for an examination and consultation, tel. 777-270