Alpha Bio implants have been produced in Israel for more than twenty-five years. They are extremely popular and in great demand due to their high quality and affordable price. The manufacturer is, it has been in second place on the market for a long time and is popular both in Israel and around the world. It is important to note that, despite the huge demand on the world stage, the company does not stand still and continues to make developments.
Thanks to this article, you will be able to compare different types of implants, learn about their differences, pros and cons. You can also learn about the structure of implants, their features and the cost of their installation. This will help you make the right choice without overpayments.
Composition of Alpha-Bio implants
The company makes implants from an alloy that includes titanium, as well as aluminum and vanadium for longer service. Because the titanium base is diluted, the strength of the implants increases by 13% compared to iron posts. This is one of the most popular manufacturing materials. However, this alloy has a disadvantage: it slightly worsens the survival rate of the implant (it is about 98%).
The upper part of the implants is performed in a modern way: first of all, the surface undergoes a treatment process, after which the surface layer is removed using chemicals. Almost all modern implants have this type of surface.
The surface is porous, so it is easily fixed in the bone and combines well with the composition of the blood. However, the latest developments are not used in the manufacture of such a surface. They are used only on expensive implants: this promotes faster engraftment, reduces the risk of rejection, and reduces the waiting period before prosthetics.
Taking an impression of multi-component abutments
After making impressions of the implants with the gingival margin formed, individualization of standard transfers for the open tray follows. Otherwise, an accurate impression of the soft tissue in the implantation area will not be obtained.
Algorithm for taking an impression of a MultiUnit structure:
- Transfers are established and recorded on superstructures.
- Impression fluid is applied around the transfer with a syringe.
- Impression fluid is applied to a special impression tray.
- A spoon is inserted into the oral cavity.
- After the material has hardened, the spoon is removed from the mouth and the screws securing the transfers are removed.
- The resulting impression is sent to the laboratory, where abutment analogs are combined with transfers.
- The screw is screwed in.
- A model of the mouth is cast.
Characteristics of Alpha Bio implant models
Currently, Alpha-Bio Tec has 8 implants of different types:
- NEO1;
- SPI;
- ISE;
- DFI;
- ATID;
- NEO2;
- NICE;
- Arrow.
The first five options refer to implants with an internal hexagon, while the rest are a system in which there is also a conical type connection with six edges. This option is used if there is not enough bone for installation. Arrows are used for incisors on both the upper and lower jaws.
The shape of the implants is selected according to the characteristics of the jaw shape, which allows them to be installed even by people with a significant defect in the shape of the jaw. A correctly chosen form can reduce injuries to soft tissues, while reducing the healing time of the implant. Thanks to the hexagonal shape, the risk of food getting into the gaps or causing infection is reduced to a minimum. The average healing time for implants is 5 months.
NEO
This type of implant is a classic option for any type of bone. In its device, it has a main and 2 microthreads, which allows you to increase the area of the implant that touches the bone. This significantly improves survival rate. Such implants allow them to be installed with less trauma to the bone, and therefore heal much faster. This type is used for classical implantation in two stages and is installed in bones of any size and density.
A significant advantage of this type of implant is the ability to implement highly aesthetic restorations on its surface.
SPI
This type of implant is called a flagship. This type is used mainly for soft bones. This implant is very small, so it screws in, allowing the bone tissue to compact around it, ensuring the stability of the implant for a long time. This allows these implants to be used for immediate prosthetics.
This type of implant is also used when space is critically limited: it requires only 2 mm of free space around the implant, separating it from your own tooth. Thanks to screwing, it can be used even in cases where there is very little bone tissue. The advantage is the ability to install the implant immediately, without additional preparation.
ICE
This type is suitable for implanting any type of bone tissue, i.e. is universal and can be used for all types of prosthetics anywhere. Thanks to its special design, this implant does not allow the gum to recede.
DFI
Such implants are also universal, but are more often used for dense bone tissue due to their screw shape. That is why they ensure strong stability of the implant during the operation and heal quickly.
ATID
These implants are suitable for the hardest bone tissues, which have few blood vessels, most often the lower jaw. A feature of this type of implant is the ability to evenly distribute large loads. The healing period for this type of implant is approximately 5 months.
NEO2
All NEO type implants are considered a new generation of implants due to their spiral shape, which allows them to be used with minimal free space. With their help, you can perform aesthetic prosthetics using CAD or CAM technologies.
NICE
This type of implant is distinguished by its thinness, so it is very convenient to use in narrow parts of the jaws. It is used in very confined spaces, most often near natural teeth or their roots.
The implant itself is a thin conical body with a sharply sharpened thread and a conical hexagonal connection.
Arrow
These implants are a system that includes two types: ARRP and ARRC.
ARRP is a one-piece implant with a removable abutment, used in cases where the jaw shape is very narrow. It is intended for implantation of incisors on both jaws. Such implants are an ideal option for instant prosthetics. ARRC is similar to the implant described above, its only difference is the absence of a removable upper part. This allows you to choose the right one for any type of prosthetics.
Prices
| Implants with internal hexagon | |
| Model | Price in rubles |
| NEO | 6 902 |
| SPI | 5 177 |
| ICE | 4 900 |
| DFI | 4600 |
| ATID | 3 800 |
| Conical hex implants | |
| NEO | 6 902 |
| NICE | 5 500 |
| Thin implants | |
| ARRC | 4 602 |
| ARRP | 4 602 |
| ARR | 2 400 |
| ARB | 2 400 |
Pros and cons of Alpha Bio implants
Despite the large number of advantages, implants belong to the economy class, so the latest developments are not used in their production.
Advantages of Alpa-bio implants
The implants are made of a reliable titanium alloy, which contains aluminum and vanadium. This fusion takes root in almost 100% of patients. Implants are distinguished by their high strength and longevity - more than 10 years. Their design is completely safe, installation takes little time with minimal damage, which makes the healing process very fast.
A significant advantage is the ability to install an implant immediately after removing your own tooth. This does not require additional installation of a titanium rod. Both one-stage and two-stage implantation can be performed. The shape and type of implant is selected individually, taking into account the shape of the jaw, bone density and volume. This allows implantation even with the thinnest bone tissue.
Due to the fact that the implants are made of titanium alloy, the risk of allergies is completely eliminated. All implants have a shape that is as close as possible to the original shape of the tooth, which makes the healing process with minimal trauma. The coating has a porous structure, which improves the stability of the implant and also speeds up the healing process - it happens quickly and allows you to install dentures in the shortest possible time. The pores also help the implant and bone tissue to grow together faster.
Cons of Alpha Bio
Despite the high strength of implants, due to the presence of aluminum and vanadium in the alloy, their survival rate slightly deteriorates (by 2-3%). Also, this type of surface does not have an ultra-hydrophilic coating, which is found in more expensive implants. Because of this, the survival process takes longer.
The versatility of Alpha Bio implants
Typically, dental clinics work with only a few implantation systems (one or two), since each of them requires large financial costs. Any of the systems requires certain expensive surgical instruments, orthopedic kits and much more. That is why surgeons often do not offer the best implantation option that suits the client based on his characteristics, but make a choice from the available options, because he is limited by the choice of implants with which he works.
It is worth highlighting that each implant is produced in a unique package. It is completely sealed and therefore protects the product from possible damage. Thanks to this packaging, the implant is installed immediately after opening it, without any contact with any surfaces.
How does the installation work?
Multi-unit adapters are installed after the healing abutments are removed. Installation is preceded by determining the required height of the connecting element.
Installation protocol:
- Select a multi-unit for the appropriate platform.
- Position and install into the implant using the holder.
- Tighten the screw connection.
- Remove the holder by rotating counterclockwise.
- Final tightening of the screw with a screwdriver and a wrench with a dynamic force of 30 N/cm.
MultiUnit suprastructures are usually supplied with a torque wrench, holder and screwdriver.
Dental implantation with the Alpha Bio implant system
The implantation system includes only eight types of implants, with the help of which it is possible to carry out implantation for any structural features of the jaw and for any bone density.
There are implants that are used only for immediate prosthetics, while others are used for standard implantation in two stages. In addition, there are models that can improve the fixation of removable prostheses.
Among other things, there are types of implants that can be used to perform implantation in cases of significant bone deficiency. With their help, there is no need to build up additional bone tissue.
Alpha Bio implants are distinguished by their durability, are safe and have an aesthetic appearance. All types of implants have undergone numerous quality checks. Implants are distinguished by their strength, long service life (more than 10 years), exert little pressure on the jaw bone, and also have a thread with a self-tapping effect.
They are easy to install and provide primary stability. The company produces implants that are as close in shape as possible to the natural shape of the tooth - this makes the healing process faster and virtually painless, without adding unnecessary trauma. Another feature: you can chew with new dentures immediately after their installation, which is a definite plus.
A significant advantage is the conical shape: it promotes rapid healing of the implant and also reduces the amount of damage during installation. It requires a minimal amount of bone tissue without additional augmentation, which allows implants to be installed at very low bone density. Another advantage is that there is no need to prepare the jaw bed before installing the pin.
In Russia, these implants are quite popular, so you can find them by contacting almost any dentistry. The company itself also focuses on the Russian market, holding various master classes and seminars. Training courses for working with Alpha Bio products are also often organized.
Manufacturers
Two thousand companies produce implants and suprastructures, of which two hundred have their own factories, and only 62 companies have a closed production cycle. These include: Nobel Biocare (Switzerland), Alpha-Bio (Israel), Ankylos (Germany) and Astra Tech (Sweden).
Multi-unit abutments are available for almost all known systems and are a standard solution to non-standard prosthetic problems.
Nobel (Nobel) . The Nobel company produces suprastructures from highly biocompatible materials (titanium, zirconium, gold, and their alloys) using the latest technologies. The difference between Nobel products is super precise fit, excellent cosmetic results.
The innovative design of the original Multi-unit Nobel adapter is the recognized standard for partial and full dentures. Conditionally removable acrylic dentures are manufactured using patented NobelProcera technology based on scanning and 3D modeling. After calculations, we obtain the most accurate titanium frame and a multi-profile connecting element adapted to the patient’s jaw.
Features of abutments made using Nobel Procera technology:
- strength;
- accuracy;
- maintainability;
- aesthetics;
- long-term operation.
Alpha-Bio (Alpha-Bio) . They are made from biocompatible materials, have a practical design, and fit well to the gums. The main difference is a reliable connection and ease of installation. The hexagonal recess inside the metal root fits exactly into the hexagonal cone of the superstructure. A tight fit of the inner wall of the implant to the multiunit abutment is ensured, eliminating gaps and microcracks.
Ankylos (Ankylosis) . A special feature of German Ankylosis abutments is the TissueCare Connection, which moves the transition border closer to the center of the root. This reduces the load and eliminates loosening and breakage of the superstructure.
Ankylos implants are supplied in a sterile flask, each structural element is placed in a sealed package, the set contains a fixing screw and a holder. Ankylosis products are manufactured according to three-dimensional computer modeling. A unified fastening with an implant provides a free combination of orthopedic elements.
Dentium (Dentium) . The South Korean company began manufacturing implants and superstructures in 2000. Advantages of abutments:
- ease of installation;
- tight connection with the implant, eliminating the risk of infection;
- good stabilization due to tight fixation;
- excellent aesthetic indicators;
- time-tested quality.
Astra Tech (Astra Tech) . The Swedish company produces four types of permanent and temporary abutments for different clinical cases.
Features of Astra Tech multi-unit superstructures:
- Precise load distribution with self-centering Conical Seal Design.
- Sterility - Astra Tech implants are stored and transported in vacuum ampoules.
- The cone shape is a reliable insurance against displacements inside the structure.
- The absence of a central screw ensures tightness and prevents bacteria from entering the structure.
- The ability to grind allows you to adjust the size and shape of the structure to fit the jaw bone.
- Universality - thanks to the uniform diameter of the structural elements, each Astra Tech implant fits any Astra Tech abutment.
Cost of implants
- 1. When implanting several teeth. The installation cost for one implant is 20 thousand rubles. The price includes only the operation without a crown. Compared to other mid- and premium-class implants, this cost is very low. In the first case, the cost of one operation alone can be more than 70 thousand rubles.
Cost with consumables:
- with a metal-ceramic crown - from 35 thousand rubles;
- with ceramic zirconium - from 50 thousand rubles.
- 2. In case of complete absence of teeth. A jaw that is completely missing teeth is recommended to be implanted with a long-term fixed prosthesis, which contains four implants. The price of such prosthetics ranges from 150 thousand rubles to 180 thousand rubles.
These prices are very low, especially considering that the quality is in no way inferior to premium implants.
Alternative Methods
The absence of one or more adjacent teeth can be compensated for by:
- removable dentures;
- bridges provided that the supporting teeth are healthy;
- prosthetics on mini-implants.
Service life and warranty
guarantees indefinite wearing of implants. In case of implant rejection, splitting or other damage, re-installation is performed. However, in this case, the claim must be submitted in writing, i.e. proof of guilt of the company that performed the implantation. Then re-implantation will be carried out at the expense of the company or doctor who installed the implant the first time.
A lifetime guarantee means that Alpha Bio implants are worn for life. This is a great advantage: you only need to perform one operation, which will last for a lifetime. However, it is important to consider that the service life depends not only on the quality of the implants and the installer, but also on the patient’s care for the prostheses. It is imperative to maintain thorough oral hygiene and undergo regular dental examinations.
Contraindications
These systems are not suitable for every patient. Contraindications for installation are as follows:
- allergy to construction material;
- blood diseases;
- diseases of the endocrine, cardiovascular and nervous systems;
- tuberculosis;
- AIDS;
- bruxism;
- chronic forms of drug addiction and alcoholism.
Implants are not installed in patients with mental disorders and cancer.
In the video, watch how the procedure for installing the Alpha Bio implant is carried out.
Reviews
Since the Alpha Bio company is one of the most popular in the world for the production of implants, there are, accordingly, a lot of customers and reviews. As the main advantages, patients highlight the very fast and painless installation of implants - only 15 minutes. I am also delighted by the low price and excellent quality. After installing the implants, there is virtually no pain, and the dentures take root and feel like natural teeth. A large number of positive reviews from people who have problems: too little bone tissue, weak gums, soft bone tissue. However, Alpha Bio implants have a large selection of products for any occasion, so the installation was also quick and painless, without causing any complications both during and after the operation. In addition, these implants can be installed several at a time absolutely painlessly. Pain does not appear even after the anesthesia wears off.
However, as mentioned above, not only the implants play an important role, but also the doctor who installed them, as well as the care of the patient after installation.
Flaws
In fact, these systems have practically no disadvantages, unless we count as such certain contraindications related to the patient’s health condition.
In addition, doctors note that the company is increasingly introducing more high-tech solutions and new products to the market, although their competitors in the same price segment are more active in this matter.
Read the fairest reviews about Mis implants from the Israeli manufacturer. Let's discuss here the cost of Astra Tech implants and the price of their installation.
At this address https://dentist-pro.ru/implantaciya/proizvoditeli/nobel-biocare/obzor-produkcii.html we will talk about the installation of Nobel implants.
Development
To develop implants that optimally meet the high demands of dental patients, Alpha-Bio has created a special expert group .
This group includes renowned authorities in dentistry who conduct research and development work.
Most of the investment goes into maintaining their skilled work. Thanks to this, the company creates first-class, high-quality implants, the risk of rejection is minimized.
Production
Production is carried out using digital equipment, which is pre-programmed for production by setting the necessary parameters. This approach allows you to avoid errors when forming an implant and eliminate the possibility of defects.
Manufacturing is carried out using multi-level technology:
- Implant formation.
- Creating a rough surface using acid and sandblasting.
- The finished product is tested and assigned a number.
- The structure is sterilized and packaged in an airtight container, immersed in alcohol.
It happens like this:
