Severely damaged or lost teeth are always a serious problem! The absence of teeth spoils the beauty of a smile, causes problems with the quality of chewing food, and in addition, it can even cause distortion of facial features and lead to the appearance of premature wrinkles. Therefore, if you have at least one damaged or extracted tooth in your mouth, you need to urgently start restoring it and contact a dental clinic for this.
In modern dentistry, various technologies have been developed that make it possible to replace the front teeth or to qualitatively restore chewing dental units. This article is devoted to a review of the methods by which teeth can be placed. We will look at their features, pros, cons, and also tell you how much it costs to have a tooth installed in Moscow.
Calculate the cost of treatment by taking a short test in 20 seconds!
Do not delay your treatment, because in this matter time plays against us.
If the tooth is not removed, but simply severely damaged
A tooth can decay for various reasons – for example, due to injury. But most often, tooth decay is caused by caries, the treatment of which was not carried out on time. If a tooth is destroyed by more than 50%, the problem cannot be solved by installing a conventional filling. If you put a filling on such a tooth , it may not withstand the load, break or fall out. It’s even worse if the tooth breaks along with the filling and its root part is damaged. This tooth will have to be removed!
Sometimes special auxiliary elements - pins - are used to restore severely damaged teeth. You can put a tooth on a pin and get a fairly reliable and aesthetic restoration result, but again - only if the tooth is not more than fifty percent destroyed! Before placing a filling on a tooth on a pin , the doctor will assess the degree of destruction of the unit. If it is significant, it would be better to put a crown on the tooth! This will protect the tooth from destruction and will allow you to qualitatively restore its aesthetics and all important functional characteristics.
How much does it cost to put a filling on a tooth if it is badly damaged? The cost of installation will depend on the complexity of the treatment, the size of the filling, the material and type of pin that will be used in the process of tooth restoration. On average, put a filling on a tooth in Moscow for an amount ranging from 5 to 8,000 rubles.
If you want to find out the exact cost of the service before putting a filling on a tooth , visit our dental clinic in Moscow - “VENSTOM” and get the most detailed advice on the treatment and restoration of teeth from our specialists!
NOTE: If you have a filling installed, but your tooth hurts and the pain does not subside within several days, be sure to contact your dentist! Such a symptom may indicate poor-quality treatment that did not help stop the inflammatory process!
Features of implantation on the upper and lower jaw
- When restoring three teeth on the upper jaw with the help of implants, the proximity of the maxillary sinuses and the infraorbital foramen is taken into account; on the lower jaw, the proximity of the mandibular nerve is taken into account.
- On top, due to less chewing load, the bone tissue has a looser structure, so the rods take 1-2 months longer to take root than on the bottom.
- Due to the fact that after the loss of the upper units, atrophic processes occur more intensely, in most cases, bone grafting has to be done before implantation.
- When choosing models of titanium roots for the upper row, the emphasis is on increased aesthetics, for the lower row - on functionality and resistance to chewing loads.
What teeth can be put in place of extracted or lost teeth?
As we said above, even if only one unit is missing in the dentition, this is already a serious problem! And you urgently need to get an artificial tooth that will be able to perform all the functions of the lost unit and at the same time restore the aesthetics of your smile.
In Moscow, dental clinics use different technologies that allow teeth to be placed:
- 1. Removable and fixed prosthetics.
- 2. Implantation.
The choice of technology with which to place a tooth will depend on the price of the restoration service, as well as its reliability, aesthetics and durability.
Therefore, it is worth learning in advance about all the techniques, the use of which will allow you to replace the tooth in the place of the removed one. Below we will tell you in detail about removable, fixed prosthetics and implantation, which are the main technologies for restoring teeth in modern dentistry.
Removable prosthetics
Removable dentures are an opportunity to place a tooth cheaply, since the prices for removable dentures are quite affordable and accessible to a wide range of patients. Removable prosthetics are resorted to in cases of a completely toothless jaw, in the absence of four dental units in a row. A removable denture can also be placed as a temporary tooth - for example, in preparation for implantation or fixed prosthetics.
In removable prosthetics, special designs are used - dental prostheses, which a person can put on and take off himself if necessary. Hence the name of the technology. Of course, removable prosthetics allows you to install a tooth inexpensively, but it has a lot of disadvantages, including:
1. Low level of aesthetics. If you are interested in the answer to the question of which tooth to replace the extracted tooth in the smile area, let us say right away that a removable denture is not suitable for this purpose.
absolutely! Artificial teeth for removable dentures are made of acrylic plastic and do not look very natural! In addition, acrylic quickly loses its beautiful whiteness under the influence of external factors;
2. Low level of wearing comfort. Having decided to install a removable dental prosthesis, you need to be prepared for the fact that the process of adaptation to it can take a long time, diction problems may occur, and the structure itself can easily fall out during an active conversation or eating;
3. Another significant disadvantage that is definitely worth considering if you decide to install teeth and use a removable denture for this purpose is the fact that removable structures do not ensure proper distribution of the chewing load, and this is fraught with atrophy of the jaw bone.
What will the cost if you decide to replace your teeth with removable dentures? The price of the service depends on the material used to make the prosthesis (acrylic, nylon, silicone) and its type: full or partial.
Fixed prosthetics
Fixed dentures - just from the name of the designs it becomes clear that a person cannot remove them on his own, only with the help of a doctor. Fixed prosthetics should be considered as an opportunity to install teeth both in case of multiple missing teeth in rows and in case of single defects. A fixed denture is one of the answer options to the question of which tooth is best placed in front, in the smile zone, since dentures of this type are made of durable and at the same time aesthetic materials and are visually no different from natural teeth!
Fixed dentures come in different types, and we will discuss each of them in detail below.
Tabs
They belong to non-removable microprostheses and are a more reliable and durable alternative to conventional fillings made of photopolymers.
Using an inlay, you can qualitatively restore a partially destroyed tooth. How much does it cost to install a tooth using an inlay? The answer to this question will largely depend on the material used to make the microprosthesis: inlays are made of ceramic, zirconium and even gold.
Crowns
Crowns are used in cases where it is necessary to replace a tooth that has been removed and lost due to injury, as well as, if necessary, to qualitatively restore a unit that has been destroyed by caries by more than 50%.
Crowns can also be used for the aesthetic correction of teeth with an irregular and unattractive shape. If you decide to put a crown on a tooth, the price of the service will depend primarily on the material used and the production technology of the prosthesis. Crowns are made from materials such as:
1. Dental ceramics. put ceramic crowns on your teeth at a cost of 20,000 rubles per unit. This price may seem high, but it is fully compensated by the aesthetics, durability and reliability of ceramic crowns;
2. Zirconium dioxide. One of the most modern materials that began to be used for the production of dental crowns. Placing zirconium crowns on teeth in Moscow will be expensive - from 30,000 rubles per unit, but zirconium is the best material for restoring lost chewing teeth, because it has maximum strength;
3. Metal ceramics. The frame of such crowns is made of metal - precious or non-precious and on top, to obtain an aesthetic appearance, the crown is covered with a layer of ceramic mass. How much does it cost to install a metal-ceramic tooth ? The price of prosthetics in this case will depend on the material used to make the frame. It is clear that gold crowns will be the most expensive option!
Price
Our Center operates a case payment system, which guarantees patients no overpayments for additional services associated with implantation.
The implant installation case includes:
- cost of Nobel Biocare implants;
- doctor's work;
- consumables and superstructures;
- anesthesia;
- CT diagnostics before and after surgery;
- fixation of bone regeneration stimulators (up to 0.25 cm³) to the neck of the implant for simultaneous bone tissue growth in conditions of slight atrophy;
- antibiotics and painkillers at home;
- visits according to schedule.
The case for installing crowns and bridges includes:
- fixation of abutments;
- taking impressions;
- manufacturing, installation of crowns or bridges.
Sinus lifting and guided bone regeneration, if necessary, are paid separately.
Free consultation on the cost of treatment in our dentistry
Leave a request and the clinic administrator will contact you within 15 minutes!
NOTE: Gold crowns are considered an outdated option, although even today some patients order dentures made from this precious metal. In this case, the cost of the crown will depend on the amount and weight of the metal, as well as its current price per gram.
Which crown to put on a tooth? The answer to this question depends on a number of factors - for example, when restoring chewing teeth, there is no point in spending money on expensive ceramic crowns, but in order to achieve high quality and maximum durability of prosthetics, you can install zirconium teeth.
Dental bridges
Bridges are used when it is necessary to install 2 teeth or restore more units in a row. Their basis is a frame on which artificial dental units are placed. The main condition for placing a bridge on teeth is the presence of teeth that will support the structure.
The price of bridges largely depends on the material used to make them. The most expensive option is ceramic and zirconium structures.
A separate type of fixed prosthesis are veneers and lumineers, used in aesthetic dentistry. It is impossible to replace a tooth lost due to injury or disease using veneers and lumineers, since they are attached to the surface of the teeth and are intended solely to eliminate aesthetic defects of the teeth.
How much does it cost to put veneers on teeth? The price of installing veneers will depend on the type of prosthesis: veneers can be composite, ceramic, zirconium.
Nylon or polyurethane prosthesis
When it is not possible to install a bridge, a nylon prosthesis will improve the quality of life and restore aesthetics, having the following advantages:
- hypoallergenic (the design can be used by patients with hypersensitivity reactions to metal and acrylic)
- no long period of adaptation
- Features of the material that prevent the absorption of unpleasant odors
- gentle effect on the mucous membrane
- preservation of the original appearance due to the durability of the material structure
- naturalness (the type of structure is as close as possible to natural gums and teeth)
Negative aspects:
- prospect of wear and tear over a certain period of time (on average, after 3 years)
- Possible bone atrophy
- low reflective ability of the material (lack of shine)
- high cost compared to acrylic prosthesis
- probability of deformation from exposure to high and low temperatures
- the need for periodic correction
With prolonged use, roughness and plaque develop.
The structure is attached using the suction cup effect, and for better strength it is recommended to use special adhesives and gels.
Despite some disadvantages, the nylon prosthesis is popular among patients.
Implantation is the most modern technique for placing teeth
Implantation is a technique that allows you to place teeth and get the most reliable, durable and aesthetic result. This technology involves the use of special structures - dental implants, which are implanted into the jaw bone and act as an artificial analogue of the tooth root. A crown is placed on the implanted implant or a conditionally removable prosthesis is fixed.
Which tooth is better to put on implants? Implantation allows you to successfully restore both chewing units and anterior teeth that fall into the smile zone. get a dental implant in Moscow if you are completely missing teeth: special implantation protocols have been developed for this.
The prices at which a tooth can be placed in Moscow using implantation will depend on a number of factors: the type of implants, implantation technology, material of manufacture and type of denture.
Calculate the cost of treatment by taking a short test in 20 seconds!
Do not delay your treatment, because in this matter time plays against us.
Operation stages
1. Consultation
The doctor listens to the patient, determines the condition of the teeth, gums and the advisability of implantation, and answers the patient’s questions.
2. Diagnostics
The patient is sent for an x-ray. A 3D computed tomography (CT) scan is performed. Helps to exclude contraindications and assess the volume and condition of bone tissue.
3. Preparation
They organize treatment of dental pathologies (if they are diagnosed), and carry out professional cleaning of the oral cavity.
4. Installation of implants
After anesthesia, the implants are implanted using the method of detaching the gum flap, followed by suturing the gums (with a two-stage protocol) or fixed through a puncture (with a one-stage implantation).
5. Prosthetics
If the operation is organized in 2 stages, 2-6 months after the implantation of titanium roots, the patient is fitted with permanent dentures with crowns made of zirconium dioxide or metal ceramics. While the bone is fused with the implants, the patient wears a temporary removable denture. In a one-stage protocol, the installed artificial roots are loaded with an adaptive prosthesis 2-3 days after surgery. Re-prosthetics with permanent structures are organized after a year.
Where can you put your teeth?
Where to put the teeth? Implantation and prosthetics services in Moscow are offered by a large number of dental clinics. However, it is important to choose the right dentistry, where your treatment and dental restoration will be carried out at a high level of quality.
Always find out the reputation of the clinic before contacting it and remember that low prices for implantation and prosthetics are often not a reason for joy, but rather a reason to be wary and check all the information on dentistry even more carefully. High-quality dentures, crowns, implants cannot cost a penny!
If you want to have your teeth treated with prosthetics and implantation, we invite you to visit our modern dental clinic in Moscow - “VENSTOM”. We are ready to offer each of our patients: comfortable conditions for treatment, an individual approach, and high quality of all procedures performed.
With us you can have teeth placed using any of the technologies discussed in the article. Qualified specialists from our clinic will help you choose the optimal dental restoration technique for you! You can get an initial consultation on dental treatment at VENSTOM free of charge!
