Stand for toothbrushes made of plastic bottles
Hello - hello everyone!
Today we will make a beautiful and convenient stand for toothbrushes! Since glasses are no longer relevant, they are a thing of the past, so to speak.
For production we will need:
Step 1.
We take a one and a half liter plastic bottle and cut off the upper, conical part with scissors. Then, cut off the bottom of the bottle. Look carefully at the photo: here is an important aspect - you need to cut off the lower part so that it continues the bend of the conical (upper) part of the bottle. Therefore, a bottle of this particular shape is perfect for this craft.
Step 2.
Apply hot glue to the inner surface of the lower (wide) part of the cone and glue it to the lower part.
Step 3.
Now we need a five-liter plastic bottle. We take a hacksaw and saw off the neck of the bottle, leaving a little straight part of it after the cap (3-5 millimeters). We perform the same procedure with two bottles with regular necks. After that, we treat the sawed areas on the necks with sandpaper, removing shavings and sharp edges.
Step 4.
We attach the necks to the side, conical part of the previously obtained vessel and trace them in the places you need with a marker, thereby marking the places for gluing them.
Step 5.
Using a stationery knife, cut out the intended holes and glue the necks into them using hot glue.
Step 6.
Having previously degreased the surface of the stand, paint it.
Step 7
After the paint has dried, you can decorate it with braid.
That's it, now you can remove the glasses for toothbrushes from the bathroom, replacing them with this wonderful stand!
Source
What types of cups are there for toothbrushes?
In the modern world, almost every person cannot imagine his life without a toothbrush. And this is not surprising, because this accessory is designed to care for the oral cavity. On the shelves of many stores you can see a wide range of all kinds of devices: from the simplest to the electrical ones. And many will decide, well, why choose? Purchase the product and use it for its intended purpose. Also, choosing toothpaste is a very responsible task, as is choosing a cup for storage. A glass for toothbrushes is a container and “sanctuary” for an accessory.
What are they?
Once upon a time, the holder was an ordinary glass that was placed on the sink or attached to the wall.
Modern versions of this device are distinguished by their variability in appearance, and can be presented in the form of a classic stand, a funny figurine (minion, robot, monkey, etc.) or a creative object of an unusual shape. At the same time, the main function of this device is the same for all models.
Please note: What is a solid state relay, purpose, operating principle
Why are they needed?
The main purpose of the holders is to maintain the hygiene of different types of toothbrushes.
This device allows the brush not to come into contact with other surfaces on which there are a large number of pathogenic microorganisms. Once on the bristles, they begin to actively multiply there, and when brushing they enter the oral cavity, affecting dental and periodontal tissues. When storing brushes in a large family, the holder allows them to be kept separately from each other, eliminating the contact of the heads.
In addition, thanks to the device, the brush dries completely, which also reduces the risk of germs developing on it. Certain models are designed to store not only brushes, but also toothpaste, making them simply indispensable in everyday life.
Design
According to their design, holders are divided into two types:
- Classic. They are a structure made of one or two parallel plates fastened together, with special recesses or holes for inserting brushes. Classic options also include devices made in the form of open or closed cases.
- Decorative. They can have a different appearance, which allows them to serve as a holder and interior decoration. The most popular devices are in the form of bright figures of animals, insects, and cartoon characters.
Both options can be equipped with a wall mount or a stable stand.
Why is the ROX toothbrush so good and how much does it cost?
And here is the price of the Colgate 360 electric toothbrush.
How to properly store a brush
Often, in the bathroom we can see the following picture: toothbrushes are in a cup, in close contact with each other, that is, they are in contact. This is not correct and, moreover, it is dangerous for the health of the teeth and oral cavity. In this position, brushes are simply an ideal environment for the proliferation of bacteria and germs.
Also no less dangerous are cups that are equipped with holes for individual brushes. But this is not salvation either. This choice will not protect your brushes from germs and bacteria.
It is better to pay attention to a separate glass for toothbrushes, or rather for one brush. It is advisable to buy as many containers as there are members in the family, so that each of them has an individual container.
It is better to store one single brush in one container, and the toothbrush cup itself should be washed daily.
But it is important to remember that with a shared bathroom, you need to keep the brush closed and as far away from the toilet as possible. The distance should not be less than 2 meters.
DIY cabinet, shelves for the bathroom
These small pieces of furniture will also help with storage ideas.
Even though this cabinet is narrow, it holds everything you need. To make it, take:
- ready-made furniture panels;
- wooden dowels;
- euroscrews;
- drawer guides;
- furniture handles;
- loops.
Looking at the photo, assemble a nightstand that has two drawers.
The upper one is small, the lower one is divided into 3 compartments, the vertical one is convenient for storing paper, the lower one is horizontal? detergents, top soap. At the top right there is a hinged lid, which is secured with hinges. See how you can use the corner of the bathroom by making bathroom shelves here.
Thick processed boards harmonize perfectly with the shaped brackets. On such shelves you can lay out towels and other items.
Metal baskets can be placed vertically, secured to rods with special fasteners.
If you hook the metal baskets together, then you are using up the space around the cistern. If the bathroom is combined, then this storage idea for the bathroom will also certainly come in handy.
To implement the following you need:
- boards;
- corners;
- furniture hangings;
- dowels;
- self-tapping screws;
- plywood.
From the boards, using corners and screws, assemble a rectangular box.
Mark where the vertical shelves will be located. In the places where they are attached to the boards, you need to drill holes, insert dowels here, and place them on glue. Nail the plywood at the back with small nails. Attach furniture hangers and hang a shelf. If you want to secure it additionally, then use brackets.
The next bathroom shelf is original. The shelves are fixed vertically and horizontally on the base, then a frame is made from ceiling plinths, cutting the edges of these parts at an angle of 45 degrees and gluing them together.
Now it will be easy to put things in order in the bathroom so that every item has its place and the bathroom looks great. To make it easier for you to make a bathroom shelf, take a look at this process. After reading the following, you will learn how to sew a cosmetic bag.
Benefits of toothbrush storage cups
The bathroom can rightfully be considered an icon of cleanliness and beauty. The smallest elements of decor and furnishings should be comfortable, convenient and attractive in appearance. If toothbrushes and toothpastes are dumped in one ugly pile, and various things are lying around, then a general impression of the owners is created. In this case, the oral hygiene accessory simply does not dry out, which has a beneficial effect on the growth of bacteria. And this is a direct path to the development of the inflammatory process.
This only says one thing, that a glass for toothbrushes is not just a room decoration, but also a guarantee of safety. A properly selected or made glass will help avoid the proliferation of harmful bacteria that harm the oral cavity.
Thanks to its attractive appearance, the toothbrush tumbler can liven up any bathroom decor. It can be made in a forged style, or painted and pressed, it all depends on your desires and preferences. You can also choose a children's option that can amuse even the most fastidious baby.
To add charm to the bathroom, you can choose two identical glasses, but it is better to use one of them as a vase for flowers. And the second glass can be used as a stand for feminine accessories: brushes, pencils, etc.
Necessary materials
To make such convenient cups for the bathroom, I needed to prepare the following materials:
- A piece of wood (you can choose the size yourself depending on how many cups you need).
- Glass Mason jars. I used 3 pieces (one for each of my babies). Here you can also proceed from your own needs.
- Clamps - one for each jar.
- Drill.
- Screws.
- Metal rings.
- Screwdriver.
- Paint. You can also use stain.
- Sandpaper.
- Wax paper.
What should a glass be like?
A glass for toothbrushes is an important bathroom attribute. Many will say that this is just a trifle that should not attract attention and the choice of which should not be focused on. But sometimes even a small thing can brighten up even a “lifeless” interior.
Various materials are used in the production of stands for brushes and pastes. It can be ceramic, polyresin, porcelain or acrylic product. It is important that the material is completely environmentally friendly. For example, if there is a small child at home who has just learned to walk and is interested in everything, then you should exclude glass objects or crystal items that are easily broken. It is better to pay attention to plastic cups.
If we talk about the design plan, you can choose a hanging or tabletop version. The tabletop glass for toothbrushes is equipped with a special holder, which is made of metal or a glass glass. This is the most convenient option because the stand is easy to remove and wash.
Every person knows that a brush is an individual hygiene item. And many experts argue that everyone should have their own glass for toothbrushes. This is, of course, inconvenient, but aesthetically speaking, it is very acceptable. This is why many companies produce items equipped with special holes for brushes. They may also have holes for paste.
Preparatory stage
I was lucky that I already had a piece of wood in my garage that looked pretty good. I marked it according to the required dimensions, and then my husband sawed off the required part. This gave me a nice wooden base for my cups.
It’s easy to make a magnetic knife holder from wood: follow the instructions
Reduces the risk of complications: loss of smell is a good symptom of coronavirus
Quick search and no expired medicines: putting things in order in your home medicine cabinet
I decided to paint the wood white and then lightly sand the board. I wanted the base to look a little worn. I waited for the paint to dry. Then I went over the board with sandpaper.
I also decided to add a little accent to the wood using a wax paper transfer technique. I had to spend quite some time printing my chosen image onto the wax paper because it was stuck in the printer and wouldn't come out.
First I wrote Brush in a font I liked. I then stamped the mirror image onto wax paper. I knew it was too thin to fit through the printer properly, so I glued it on top of a regular sheet of paper. The problem was that the printer struggled to grip the slippery wax paper, causing it to tear and wrinkle. But in the end everything worked out for me.
The Ministry of Health warned: rapid aging may be a consequence of coronavirus
17 years in the crowd: why the beautiful Irina Alferova played few leading roles
Your child will love playing in the crib: how to make a pipe tunnel on the railing
Then, carefully, without touching the ink, I placed a piece of wax paper face down on the wood and taped it in place.
Using a blunt object, I rubbed the image. At the same time, it was imprinted on the tree. So a unique inscription appeared on my board, which significantly improved its appearance.
Baby holders
Do children need holders for brushes and toothpaste? Of course they are necessary, especially if there are little picky people in the family. The child is unlikely to remember that he needs to brush his teeth every day with a brush and toothpaste. And if an adult reminds you of such a need, the baby will still not try. And I really want at least a little independence from the child. What should parents do in this case?
Often, children's holders are made of artificial stone, which is called polystone. These are comfortable, practical and attractive coasters, made in an original children's style. You can also choose the desired drawing, for example, a cartoon character.
For a child
Small children often do not like to wash their face and brush their teeth; they are capricious, cry and refuse. If you choose the right brush holder for your baby, you can turn this activity into an exciting journey and a fun game. The child will look forward to the morning and evening to go to the bathroom.
Children are very fond of space aliens, interplanetary ships and the conquest of alien galaxies. You can take an old cup for hygiene products, arm yourself with bright acrylic paints, and together with your child, turn a boring holder into an intergalactic vessel. Draw stars and planets, attach unusual stickers, and let your brushes be passengers on this ship.
For little princesses there is another option. Take an image of your favorite cartoon character, print it out, stick it on a cup and secure it with tape on top. Seeing his idol every morning, the baby will be more willing to brush his teeth.
DIY options
Your own decorated cup
In order to make a beautiful decorated toothbrush glass with your own hands, you will need the following materials:
First, we need to paint the container with white acrylic paint and the lid blue. Then the container should dry. Then we take napkins and remove the top layer from the drawing itself. We apply the drawing to the container and cover it on top with a layer of PVA glue.
Further, the whole matter depends on the imagination of the inventor. Some people wrap twine around part of the glass, others choose shells lined in an even layer around the entire perimeter. BUT it is better to decide on the varnish coating in advance, that is, it is advisable to apply it on top of the decor or before decoration.
"Marine" option
Every person who has been to the sea or the beach tries to bring home a sea or river “gift” - a shell, and sometimes even a lot of shells. Often these shells just sit in a box and are covered with a thick layer of dust.
It would be advisable to use the shell for a good cause, namely as a decoration for a glass or a holder for brushes. This decoration can be used to decorate an ordinary plastic glass that has a rough surface. If you only have a flat and smooth glass at hand, then use sandpaper and simply rub the surface of the product.
The surface of the cup must be covered with small stones or bottle fragments. To do this, the surface is coated with glue, and then stones are applied, which must be carefully pressed for several seconds.
Next, you can start decorating the stand with shells. Apply superglue and arrange the decorations so that they touch.
In this case, you will need a large amount of glue to keep the shells on the cup. After gluing, it is advisable to press the shells firmly so that they and the glue adhere. It is important to ensure the neatness and appearance of the holder.
This glass for toothbrushes and toothpaste will remind you of those days spent on vacation for many days. In the same style you can make stands for flowers, pencils or brushes, only your imagination is important.
Original accessory from a bottle
A good housewife won't even leave a plastic bottle unattended! From such a product you can build a useful item that will be useful in the household. For example, a stand for brushes or paste.
To make such a cute item, you need to stock up on the following materials:
It is advisable to use smooth containers rather than rough and convex ones. But, if there is none, then any one that is not large in size and not wide will do.
The neck is cut off from a plastic bottle. And the workpiece is rinsed with ordinary running water and wiped dry. Next, take any chosen varnish and draw a pattern. There is no need to decorate the entire surface of the stand with patterns; you can do this in separate areas.
Then you need to carefully weight the bottom of the bottle, because plastic is a lightweight material that simply won’t stand even with the slightest weight. You can use stones (small ones) or just glue that is poured into the bottom. It will take up to 5 minutes to dry.
Then we move on to the beads. And in the end, an attractive and original holder is ready! After the glue has completely dried, only beads and nothing else can be seen at the bottom.
Bathroom Storage Ideas
Let's look at the simplest ones first, and then look at some in more detail. You don't need to buy expensive equipment to clean up your bathtub. You can get a place to store and dry towels if you take:
- hooks;
- dowels with self-tapping screws;
- twine.
If the hooks are metal with holes, then first drill holes in the wall, insert dowels into them, and screw in self-tapping screws. If the hooks have no holes, such as plastic ones, then glue them on. Tie a rope to the 2 outer hooks, pass it through the central hook and you can hang towels and admire the order in the bath.
There are hooks on sale that screw into a hard surface; this idea for storing towels will certainly come in handy. Screw them into a wooden plank and you can hang textiles so that they are always at hand.
If you have a treated board, attach it to the wall.
Glass jars will come in handy. Wash them, remove labels. Put on metal clamps, which must first be attached to the board with self-tapping screws on one side. Here you can store glasses, cotton pads, cotton swabs, cosmetic brushes and other small items that will now never get lost.
If you have small metal baskets, they will also create a convenient storage section. They can be placed one on top of the other, if this is not provided, then each is attached to the wall. Roll up the towel, tie the cloth napkins with a ribbon, and place the toilet paper in another basket. This is the order you will achieve in the bath.
If the two-story vase for storing fruit is already quite boring, let it play a different role. On the lower tier you will place glass jars in which you will place cotton wool, disks, and sticks. There is a place on top for microfiber cloths, with which cleaning will be quick and easy.
To keep soap from storage and sea salt for baths, place these hygiene products in glass jars with metal lids. It is good to store sponges in the same container, but they must first be thoroughly dried.
To keep glass jars streak-free, wash them with water and dish soap. Wipe metal lids with a cloth until shiny.
By the way, the faucet in the bathtub will also shine like new if you polish it with a microfiber cloth or other similar soft material.
Even plant pots will help tidy up your bathtub. Pre-paint them in a color that will harmonize with the tone of the room. You can attach a stencil here to apply an intricate pattern or simple flowers.
To implement the following storage idea, prepare:
- small clean dry glass jars;
- screw caps for them;
- handles for pot lids;
- drill with a thin drill bit.
If the household does not have a drill with a thin bit, then make a hole in the center of each lid by placing a nail here and tapping it with a hammer.
You need to insert the pin from the handle for the lid into the resulting holes, and secure it at the bottom with a bolt and screw it on. Place various small hygiene items in these containers, close the lids and admire the order. Now cotton swabs will not fly away in all directions, you won’t have to look for cotton pads, everything that is in glass jars is clearly visible.
